Heat Press Instructions for DTF Transfers
This is all you need.
-
Any Garment
-
Your Transfer
-
Heat Press
![IMG_4345.png__PID:55c9678b-4071-4761-9872-3a5ccb007b3f](http://www.shinobitransfers.com/cdn/shop/files/IMG_4345.png?v=1694483673&width=1500)
1. Position
Please, take as much time as you need to position your artwork precisely within the chosen print area.
![IMG_4349.png__PID:678b4071-8761-4872-ba5c-cb007b3f59a4](http://www.shinobitransfers.com/cdn/shop/files/IMG_4349.png?v=1694483852&width=1500)
2. Press
Apply moderate pressure when pressing your transfer at a temperature range of 150°C to 160°C (155°C yields optimal results with our heat press) for a duration of 8 to 10 seconds.
![IMG_4353.png__PID:7b6b55c9-678b-4071-8761-d8723a5ccb00](http://www.shinobitransfers.com/cdn/shop/files/IMG_4353.png?v=1694483267&width=1500)
3. Hot Peel
Release the pressure, firmly wipe over the transfer with a cloth, and then proceed to peel it off.
![IMG_4349.png__PID:678b4071-8761-4872-ba5c-cb007b3f59a4](http://www.shinobitransfers.com/cdn/shop/files/IMG_4349.png?v=1694483852&width=1500)
4. Final Press
Position the Teflon sheet or parchment paper over the design, then apply an additional 3 seconds of pressure to improve the tactile quality and enhance durability.